How It Works

OUR PROVEN PROCESS

From first call to final coat, here's exactly what to expect.

Empty Colorado residential room with polished concrete floor ready for assessment

Step 01

FREE CONSULTATION

We come to you — anywhere in Colorado. We assess your concrete, walk through colors and finishes together, and leave you with a detailed, no‑obligation quote.

On-site estimate · Free color consultation

Diamond grinding machine preparing a concrete floor in a Denver commercial space

Step 02

SURFACE PREPARATION

Great floors are built on prep. Diamond grinding or shot blasting opens the concrete to the exact profile your coating needs for permanent adhesion.

Diamond grinding · Shot blasting · Crack repair

Epoxy basecoat being applied to a prepared concrete floor by Visionary Floors

Step 03

EXPERT APPLICATION

Every coat is mixed, timed, and laid with precision — whichever system your space calls for.

Epoxy · Flake · Urethane · Traffic coatings · Polish

Finished high-gloss polished concrete floor with mirror reflections in a Colorado commercial space

Step 04

FINAL WALKTHROUGH

We inspect every square foot with you before we call it done, and hand over simple care instructions so the finish stays this good.

Inspection · Care guide · Handover

Polished Concrete · Explained

THE SCIENCE OF THE GRIND

Polished concrete isn't just buffed — it's refined. Here's what's happening beneath the shine during surface prep and finishing (steps 02 and 03 above).

AGGREGATE EXPOSURE LEVELS

Every slab is a thin layer of fine "cream" sitting on top of sand and stone. Diamond grinding removes that top layer in stages — the deeper we grind, the more aggregate (the natural stone cast into the concrete) we reveal. We pick the level with you, because it changes the entire character of the floor.

Class A

Cream

Original surface. Minimal grinding keeps a smooth, uniform finish with little to no stone showing.

Class B

Salt & Pepper

A light grind exposes fine sand and small specks of aggregate for a subtle, speckled texture.

Class C

Medium / Random

Grinding deeper reveals a mix of small and medium stones in a natural, random pattern.

Class D

Full Aggregate

A deep grind fully exposes the large stone for a bold, terrazzo-like decorative look.

SLIP RESISTANCE — DCOF

A common worry is that a glossy floor must be a slippery floor. It isn't. Slip resistance is measured by the Dynamic Coefficient of Friction (DCOF), and the ANSI A137.1 standard sets 0.42 as the minimum for hard surfaces walked on while wet. Here's how polished concrete finishes stack up against that line.

Representative DCOF across finishes — every gloss level and exposure class stays comfortably above the 0.42 wet-slip floor. The lower the gloss and the more exposed the aggregate, the more grip underfoot.

0.42

The ANSI A137.1 minimum DCOF for hard floors walked on when wet.

Above

Properly finished polished concrete meets or exceeds that wet-slip floor across every gloss level.

Grip

Traction comes from texture and lower gloss — not from a dull-looking floor.

DCOF ranges shown are illustrative of published industry testing for explanation; actual values vary by finish, sealer, and site conditions.