Full Broadcast · Partial · Custom Blends
Epoxy Garage Floors in Denver: Flake Garage Floor Coating
The most popular decorative garage and commercial floor system in Colorado. Colored vinyl flakes broadcast into epoxy, locked under a tough polyaspartic or urethane topcoat for grip, durability, and style that hides everyday wear.
Serving Denver and nearby cities: Denver · Aurora · Westminster · Arvada · Thornton · Lakewood
Updated
Our Work
Recent Flake Epoxy Projects
Real flake epoxy floors we've designed and installed across Denver and the Front Range. Tap any photo to take a closer look.
Flake Garage Floors in Denver
Quick answer: for most Denver garages we recommend a flake epoxy system with a UV-stable polyaspartic topcoat. It hides dirt and tire marks, adds grip and resists road salt and chemicals. We diamond-grind every slab, with no acid etch shortcuts, and repair cracks and spalls during prep.
Cars come home coated in liquid deicer, and that brine drips onto the garage floor. A sealed, non-porous floor stops that cycle: meltwater sits on top where a squeegee can push it out the door. Free on-site estimates from our shop at 6121 Washington St in Denver. See our Denver service area, the best garage floor coating for Colorado winters and recent work.
System at a Glance
A quick reference to the flake system we install. Details for each layer are below.
| Step | What we do |
|---|---|
| Prep | Diamond-grind the slab, with no acid etch shortcuts. Cracks, spalls and pitting are repaired and moisture is evaluated first. |
| Base coat | A pigmented base coat bonds to the slab and sets the background color under the chips. |
| Broadcast | Colored vinyl flakes are broadcast into the wet base coat: full broadcast for maximum texture, or partial to let more base color show. |
| Topcoat | A clear, UV-stable polyaspartic or urethane topcoat seals the chips and takes traffic, hot tires and sun. See polyaspartic garage floors. |
| Warranty | Every install includes a 1-year warranty. Estimates are free and on site. |
What Is Flake Epoxy?
The short answer: a flake epoxy floor is a coating system, not a single product. We diamond-grind the concrete, roll on a pigmented base coat, broadcast colored vinyl flakes into it while it is wet, and seal everything under a clear, UV-stable polyaspartic or urethane topcoat. Full broadcast is the popular choice for garages because it adds grip and hides dust, salt and tire marks.
Flake (also called chip or broadcast) systems start with a solid epoxy base coat. Colored vinyl chips are scattered into the wet resin, then sealed under a clear polyaspartic or urethane topcoat. The chips create a speckled, stone-like look and a subtle texture that adds slip resistance. Because chips come in dozens of individual colors, your “color” is really a custom blend.
Full-broadcast floors cover the base completely for maximum texture and imperfection-hiding. Partial broadcasts let some base color show for a more subtle effect. Both are extremely durable when installed over properly diamond-ground concrete.
Choosing a topcoat? Read epoxy vs polyaspartic in Colorado. Want local details for your part of town? See our Denver service-area page and the full list of cities we serve.
How We Prep the Slab
The short answer: prep decides whether a flake floor lasts. We diamond-grind every slab, with no acid etch shortcuts, then repair cracks and spalls and evaluate moisture before any coating goes down.
- Clear and clean. The garage is emptied, swept and vacuumed so nothing is trapped under the coating.
- Degrease. Oil and tire marks are removed; deep stains may need to be ground out.
- Diamond grind. Grinding creates a consistent profile the coating can grip, which a chemical wash can't match.
- Repair. Cracks, spalls and pitting are filled so they don't telegraph through the finished floor. See concrete and epoxy repair.
- Check moisture. Concrete that wicks moisture can push a coating off from below, so we evaluate it and mitigate where needed.
Step-by-step details are in how to prepare a garage floor for epoxy and concrete grinding vs acid etching.
The Layers in a Flake System
The short answer: four layers: prepared concrete, a pigmented base coat, a vinyl flake broadcast and a clear topcoat. The topcoat is the layer that takes traffic, hot tires and sun, so it is the one to ask about when you compare quotes.
| Layer | What it does |
|---|---|
| 1. Diamond-ground prep | Opens the concrete so the coating can bond. Cracks and spalls are repaired and moisture is evaluated first. |
| 2. Pigmented base coat | Bonds to the slab and sets the background color under the chips. |
| 3. Vinyl flake broadcast | Chips are broadcast into the wet base coat, fully (full broadcast) or lightly (partial), for texture and a multi-tone look. |
| 4. Clear topcoat | The wear layer. We use UV-stable polyaspartic or urethane topcoats that resist yellowing in Colorado sun. |
For most Colorado garages we seal flake with a polyaspartic topcoat. Learn why on our polyaspartic garage floors page, or compare wear layers in polyaspartic vs urethane topcoats and hot tires and garage epoxy.
Why Flake Wins Garages
Key Benefits of Flake Systems
Built-in Slip Resistance
The flake texture provides traction underfoot — far better than a smooth solid-color floor when wet or oily.
Hides Imperfections & Dirt
The multi-tone speckled surface camouflages minor slab cracks, tire marks, dust, and everyday mess between cleanings.
Extremely Durable
Full-build systems with quality topcoats stand up to hot tires, dropped tools, chemicals, and Colorado freeze-thaw cycles.
Endless Color Options
Charcoal with blue accent, warm earth tones, granite looks, black & white — we bring samples so you see real chips in your light.
UV-Stable Topcoats
Polyaspartic and aliphatic urethane topcoats resist yellowing under high-altitude Colorado sun.
Fast Install Options
With polyaspartic systems, many garages can be completed and back in light use within about 3 days.
2026 Trending Flake Colors
The short answer: your color is a custom blend of individual chip colors, and mid-tone blends are the easiest to live with in a garage.
Cool single-tone gray is giving way to warmer, more complex blends:
- Charcoal + blue/steel accent — the new garage standard; modern and hides tire marks.
- Warm earth tones — saddle tan, granite, autumn, coastal blends that feel residential.
- Multi-chip 4–5 color mixes — natural stone / terrazzo-like depth.
- Classic black & white granite — timeless high-contrast that never dates.
We’ll bring physical samples to your space so you can compare blends against your walls and lighting before committing. Mid-tone charcoal and gray blends hide dust, salt and tire marks best in a Colorado garage. For more ideas, see the best flake colors for 2026 and flake epoxy design ideas.
Caring for a Flake Floor
The short answer: sweep grit, rinse away road salt and snowmelt regularly in winter, and clean spills promptly with a pH-neutral cleaner. The topcoat does the heavy lifting.
- Sweep or dust-mop sand and grit before it gets tracked around.
- Rinse or mop salt and snowmelt with warm water through the winter.
- Use a mat under parked vehicles to catch drips and meltwater.
- Avoid harsh solvents and abrasive pads, which can dull the topcoat.
More in our winter garage floor maintenance guide. Every install includes a 1-year warranty; see what a garage floor coating warranty should cover.
Comparing garage options? See our garage floor coating packages and free estimate, or read epoxy vs polyaspartic in Colorado and polyaspartic cure time.
Answers
